Skip to content
/ warmup Public
forked from ha-warmup/warmup

Home Assistant integration for Warmup underfloor heating thermostats

License

Notifications You must be signed in to change notification settings

rct/warmup

 
 

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

31 Commits
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Introduction

This is a library for communicating with a wifi-enabled home thermostat made by Warmup. At the time of writing, this only includes the warmup 4IE.

This code is inspired by a project for SmartThingsHub, see here. Many Thanks to alyc100 for the great work!

Warmup Plc was not involved in the creation of this software and has not sanctioned or endorsed it in any way. 4IE is a registered trademark of Warmup Plc.

License

This software is available under Apache license. Please see LICENSE.txt.

Usage

The library is primary intended to interface the 4IE with home assistant, but may also be used standalone.

Home Assistant

To setup this component, you need to register to warmup first. see https://my.warmup.com/login

Then copy the contents of the warmup subfolder into custom_components in your HA config folder, e.g.:

cd path/to/your/config

git clone https://github.com/ha-warmup/warmup.git /tmp/warmup

# remove any previous version
rm -r ./custom_components/warmup 2>/dev/null
mkdir -p ./custom_components/warmup
cp -r /tmp/warmup/warmup/* ./custom_components/warmup
# clean up
rm -rf /tmp/warmup/

NB: Previous versions of these instructions stated to use warmup_cc however this is now simply warmup

Then add to your configuration.yaml:

climate:
  - platform: warmup
    username: YOUR_E_MAIL_ADDRESS
    password: YOUR_PASSWORD
  • username (required): the username used to login to the warmup web site
  • password (required): the password used to login to the warmup web site; may be moved to the secrets.yaml file. See secrets

After restarting home assistant, the component will be loaded automatically.

Standalone

You may install the library via pip using

>>> pip install warmup4ie

After that, import the library, and away we go.

>>> import warmup4ie
>>> warmup = warmup4ie.Warmup4IE('<e-mail>', '<password>',
>>> warmup.get_all_devices()
>>> device = warmup.get_device_by_name("Underfloor")
>>> device.get_current_temperature()

Device Versions

Supported models:

  • 4IE

Since I only have access to the 4IE, that is the model that the development has occured with.

Supported Features

At the moment the library supports reading current temperature, target temperature plus other values from the thermostat and setting the target temperature, switching between manual, automatic and frost protection mode, switching the device off. and setting a temporary override.

Release Notes

0.1.0

  • inital release

0.1.1

  • bug fixes

0.1.2

  • bug fixes

0.1.3

  • changed http-request to use the new api.
  • adapted file names to comply with the new naming structure of HA introduced with 0.92

0.1.4

  • added functionality to allow configuration of Warmup4IE thermostat via HA UI Config entry.

0.1.5

  • added getter methods for location, location id, room name, room id and serial number

0.1.6

  • Changed so that multiple devices are updated in a single HTTP request
  • Added Set Override method
  • Added access to the following information from the thermostat
    • target_temperature_low
    • target_temperature_high
    • floor_temperature
    • floor_temperature_2
    • air_temperature
    • away_temperature
    • comfort_temperature
    • cost
    • energy
    • fixed_temperature
    • override_temperature
    • override_duration
    • sleep_temperature
    • override_duration_mins

About

Home Assistant integration for Warmup underfloor heating thermostats

Resources

License

Stars

Watchers

Forks

Packages

No packages published

Languages

  • Python 100.0%