Skip to content

Latest commit

 

History

History

DAC

Folders and files

NameName
Last commit message
Last commit date

parent directory

..
DacSample
DacSample
 
 
images
images
 
 
DacSample.sln
DacSample.sln
 
 
README.md
README.md
 
 
category.txt
category.txt
 
 

README.md

🌶️ - Digital Analog Converter sample

Shows how to use the System.Device.Dac API to output values to a DAC.

The sample is located here.

Board Pin Reference

STM32F769I_DISCO pin assignments

DAC Channel 0 = GPIOA_PIN4 (CN14_A1)

ESP32 pin assignments

ESP32 pin assignments are variable, and must be assigned before use.

Scenarios

This sample allows the developer to output several output sequences to the Digital Analog Converter. You can choose one of three scenarios:

Instantiate and configure DAC peripheral

This scenario demonstrates the how to instantiate the device default DAC controller and use it's property APIs in order to grab information about the DAC resolution in order to adjust the samples output.

Output a triangle wave

Triangle wave

This scenario demonstrates the use the DAC to output a triangle wave.

Output a square wave

Square wave

This scenario demonstrates the use the DAC to output a square wave.

Output a sine wave

Sine wave

This scenario demonstrates the use the DAC to output a sine wave.

Hardware requirements

Any hardware device running a nanoFramework image built with DAC support enabled.

Related topics

Reference

Build the sample

  1. Start Microsoft Visual Studio 2022 or Visual Studio 2019 (Visual Studio 2017 should be OK too) and select File > Open > Project/Solution.
  2. Starting in the folder where you unzipped the samples/cloned the repository, go to the subfolder for this specific sample. Double-click the Visual Studio Solution (.sln) file.
  3. Press Ctrl+Shift+B, or select Build > Build Solution.

Run the sample

The next steps depend on whether you just want to deploy the sample or you want to both deploy and run it.

Deploying the sample

  • Select Build > Deploy Solution.

Deploying and running the sample

  • To debug the sample and then run it, press F5 or select Debug > Start Debugging.

Note

Important: Before deploying or running the sample, please make sure your device is visible in the Device Explorer.

Tip: To display the Device Explorer, go to Visual Studio menus: View > Other Windows > Device Explorer.