Skip to content

bpaauwe/wdpoly

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

40 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Weather Display Polyglot

This is the Weather Display Poly for the Universal Devices ISY994i](https://www.universal-devices.com/residential/ISY) Polyglot interface with Polyglot V2 (c) 2018 Robert Paauwe MIT license.

This node server is intended to support the Weather Display software.

Installation

  1. Backup Your ISY in case of problems!
    • Really, do the backup, please
  2. Go to the Polyglot Store in the UI and install.
  3. Add NodeServer in Polyglot Web
    • After the install completes, Polyglot will reboot your ISY, you can watch the status in the main polyglot log.
  4. Once your ISY is back up open the Admin Console.
  5. The node server should automatically run and find your hub(s) and start adding weather sensors. It can take a couple of minutes to discover the sensors. Verify by checking the nodeserver log.
    • While this is running you can view the nodeserver log in the Polyglot UI to see what it's doing
  6. This should find your Air/Sky sensors and add them to the ISY with all the sensor values.

Node Settings

The settings for this node are:

Short Poll

  • Not used

Long Poll

  • Not currently used

UDPport

  • Configure the port Weather Display sends data on (TBD).

IPAddress

  • Configure the multicast IP address used by Weather Display (TBD).

Units

  • Configure the units used when displaying data. Choices are:
  • metric - SI / metric units
  • us - units generally used in the U.S.
  • uk - units generally used in the U.K.

Data Configuration

  • Configure which data fields to pass to the ISY. The key is node-fieldname and the value is the Weather Display field number. The following is the complete list:
        temperature-main : 4
        temperature-dewpoint : 72
        temperature-windchill : 44
        temperature-heatindex : 112
        temperature-apparent : 130
        temperature-inside : 12
        temperature-extra1 : 16
        temperature-extra2 : 20
        temperature-extra3 : 21
        temperature-extra4 : 22
        temperature-extra5 : 23
        temperature-extra6 : 24
        temperature-extra7 : 25
        temperature-extra8 : n/a
        temperature-extra9 : n/a
        temperature-extra10 : n/a
        temperature-max : 46
        temperature-min : 47
        temperature-soil : 14 

        humidiy-main : 5
        humidiy-inside : 13
        humidiy-extra1 : 17
        humidiy-extra2 : 26
        humidiy-extra3 : 27
        humidiy-extra4 : 28
        humidiy-extra5 : n/a

        pressure-station : n/a
        pressure-sealevel : 6
        pressure-trend : 50

        wind-windspeed : 2
        wind-winddir : 3
        wind-gustspeed : n/a
        wind-gustdir : n/a
        wind-lullspeed : n/a
        wind-avgwindspeed : 1

        rain-rate : 10
        rain-hourly : n/a
        rain-daily : 7
        rain-weekly : n/a
        rain-monthly : 8
        rain-yearly : 9
        rain-maxrate : 11
        rain-yesterday : 19

        light-uv : 79
        light-solar_radiation : 127
        light-illuminace : n/a
	light-solar_percent: 34

        lightning-strikes : 33
        lightning-distance : 118

Requirements

  1. Polyglot V2 itself should be run on Raspian Stretch. To check your version, cat /etc/os-release and the first line should look like PRETTY_NAME="Raspbian GNU/Linux 9 (stretch)". It is possible to upgrade from Jessie to Stretch, but I would recommend just re-imaging the SD card. Some helpful links:
  2. This has only been tested with ISY 5.0.13 so it is not guaranteed to work with any other version.

Configuring Weather Display

The Weather Display software must be configured to output its data over UDP for this node server to function. To configure Weather Display, go to the control panel and select "FTP & Connections METAR/NOAA"

The default multicast IP address of 231.31.31.31 is fine, but if you change it here, then you'll also have to change the node server configuration to match. Depending on how you're running Polyglot, you may need to set a port number > 1000. non-root accounts are not able to use ports below 1000 on Linux systems. Best to set this to something larger, 1333 works.

In the 'Server enabled (connected to weather station) section there are a series of check boxes. Set those as appropriate for your station but make sure "Send complete clientraw" is checked

Toggle the server to enabled (switch button on left should be green) and turn on the main networking switch (switch button on right should be green).

You may have to restart Weather Display for these changes to fully take effect.

Upgrading

Open the Polyglot web page, go to nodeserver store and click "Update" for "WeatherDisplay".

For Polyglot 2.0.35, hit "Cancel" in the update window so the profile will not be updated and ISY rebooted. The install procedure will properly handle this for you. This will change with 2.0.36, for that version you will always say "No" and let the install procedure handle it for you as well.

Then restart the Weather Display nodeserver by selecting it in the Polyglot dashboard and select Control -> Restart, then watch the log to make sure everything goes well.

The Weather Display nodeserver keeps track of the version number and when a profile rebuild is necessary. The profile/version.txt will contain the Weather Display profile_version which is updated in server.json when the profile should be rebuilt.

Release Notes

  • 0.2.2 07/16/2020
    • Fixup editor names to match node definitions
    • Add average wind speed to wind speed conversions
    • Change wind speed conversion to assume incoming value is in knots.
  • 0.2.1 03/20/2019
    • Fix online status going false after query.
  • 0.1.0 09/14/2018
    • Initial version released published to github

About

No description, website, or topics provided.

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published