Skip to content

Dan-in-CA/sip_plugins

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

SIP Plugins

###A collection of user contributed plugins for the Raspberry Pi based irrigation controll software SIP.

####To ask questions and learn more about SIP and plugins please visit the SIP Forum

Please note: Unless otherwise stated: This is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.

These programs are distributed in the hope that they will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. http://opensource.org/licenses/gpl-3.0.html


backup_settings

This plugin allows remote access (download and upload) of all the settings data necessary for SIP configuration. This facilitates complete rebuild or replacement of the system without losing any SIP settings or log data.

buzzer

This plugin has been created to provide simple audio feedback. This plugin is intended to be controlled through other plugins through the "buzzer_beep" signal. Buzzer should be connected to GPIO pin 32.

california_monthly

Provides automatic monthly adjustment of irrigation times based on historical weather data. Requires SIP version 4.1.7 or later.

cli_control

Sends command line commands to control remote stations e.g. RF devices. Replaces rf_control.

combine_stations

Allows multiple stations to be run at the same time (concurrently) when SIP is in sequential mode.

diurnal_display

This plugin shades the home page schedule graph to illustrate sunrise and sunset times. Provides a simple sample of a plugin that alters the SIP UI (capabilities available from SIP 5.1.70 onwards).

email_adj

Sends status email to google email account. NOTE: This plugin runs under Python2x only. may use obsolete code - see sip_email plugin for updated version.

flow

Allows the addition of a water flow sensor to enable real-time flow data and logging of water usage. Requires SIP v4.1.46 (or later) or the most current version of the plugin_manager from the plugins list. Requires Python 3.

keypad

A plugin for using an 4X4 scanning keypad to execute simple functions without the use of an external peripheral. This plugin interfaces with buzzer and ssd1306 plugins through signals.

lcd_adj

Uses I2C for LCD 16x2 char data display

moisture_sensor_control

Suppress or trigger schedules based on moisture sensors readings. Requires a plugin that supplies moisture sensor readings, for example the moisture_sensor_data_mqtt plugin.

moisture_sensor_data_mqtt

Gathers data provided by moisture sensors via MQTT. Makes the data available to the moisture_sensor_control plugin and the simple_chart plugin. Requires the mqtt plugin.

monthly_adj

Adjust irrigation time each month. Requires SIP version 4.1.7 or later.

monthly_adjust_per_station

Adjusts irrigation time per station per month. Allows a more fine grained control than montly_adjust and the water level setting on the home page. Requires SIP version 5.1.30 or later.

mqtt

This is the base mqtt plugin. It provides a shared MQTT client object for other plugins. Requires paho mqtt.

mqtt_get_values

Requires base mqtt plugin. Can be used to read SIP's gv.* settings. See gv_reference.txt in the SIP folder for a list of settings.

mqtt_hass

Home Assistant integration using MQTT autodiscovery. Requires SIP version 4.1.25 or later, and base mqtt plugin Run "python3 -m pip install python-slugify --upgrade" before installing this plugin.

mqtt_set_values

Requires base mqtt plugin. Can be used to change SIP's gv.* settings. See gv_reference.txt in the SIP folder for a list of settings.

mqtt_schedule

Relies on MQTT, subscribes to a control topic and schedules run once programs as command by MQTT.

mqtt_slave

Relies on MQTT, subscribes to a control topic and allows one SIP system to control other SIPs using MQTT.

mqtt_zones

Relies on MQTT, broadcasts the current status of all zones.

node_red

Under development. Not fully documented. Use with caution.

pcf857x_plugin

Provides an easy, inexpensive solution for adding a large number of stations. Requires Python 3.

pcf_8591_adj

Read sensor data (temp or voltage) from I2C PCF8591 ADC/DAC

plugin_manager

Allows SIP to install plugins (installed by default)

pressure_adj

Checks water pressure when master station is switched on

proto

A bare bones plugin for use as a starting point for plugin authoring. (Installed by default)

pulse_cct

Pulses a selected circuit with a 2.5 Hz signal for 30 sec to discover the location of a valve

pump_control

Controls a pump relay via an Arduino over i2C. Checks pressure in pipe ensuring proper operation.

relay_16

A relaly_board update for use on 40 pin GPIO headers. Supports up to 16 relays. Requires SIP 3.2.43 or later.

relay_board

A plugin for using relay boards to control sprinkler valves, etc

schedule_data_collector

Gathers data provided by schedules (start time, duration) and makes the data available to the simple_chart plugin.

simple_chart

Displays line charts base on data provided by other plugins such as the schedule_data_collector plugin or the moisture_sensor_data_mqtt plugin.

sip_email

Sends email notifications of important SIP events. Python 3 only.

shutdown_button

Provides a means of stopping the SIP program from the UI.

signaling_examples

Example plugin provides functions triggered by signals from core program (installed by default)

sms_adj

Control your SIP using SMS (Short Message Service)

sms_plivo

Allows plugins that are configured to this messaging framework to send SMS and voice messages through the Plivo service. Requires Python 3 and a Plivo account.

sms_twilio

Allows plugins to send SMS and voice messages through the Twilio service. Requires Python 3 and a Twilio account.

ssd1306

Plugin for SSD1306 128x64 pixel display connected to I2C interface.

system_update

Allows updating SIP software from integrated UI (Installed by default)

telegram_bot

A simple telegram.org bot to interface with a SIP installation. Run "pip install python-telegram-bot --upgrade" before installing this plugin.

waveshare_relay_board

A plugin for using Waveshare RPi Relay Board (B) to control sprinkler valves.

weather_level_adj

Adjust irrigation time based on weather forecast

advance_control

Plug-in to control valves in shelly, in the future son-off will be supported and more shelly versions. Use HTTP DD commands.