iNav 7.1.2 After saving VTX settings via OSD menu, all iNav settings will be cleared.

[SeriouSerg]

Current Behavior

The same as here
#8528

Steps to Reproduce

1. Change VTX Settings via OSD menu
2. Save VTX settings in OSD menu
3. All iNav settings will lost.

Suggested solution(s)

Maybe recursion problem, not flash issues.

• FC Board name and vendor: Matek H743
• INAV version string: 7.1.2

I don’t understand why the admins marked this problem as solved, it hasn’t been solved. One time out of two the controller goes into a cyclic reboot and all settings are lost.
In this case, the picture on the OSD does not change (OSD remains in menu mode and displays two items - Confirm - YES, BACK). It looks like the controller is getting into a reboot loop.