Skip to content

Latest commit

 

History

History
907 lines (676 loc) · 45.8 KB

README.md

File metadata and controls

907 lines (676 loc) · 45.8 KB
Raw

Selenium-Grid Helm Chart

This chart enables the creation of a Selenium Grid Server in Kubernetes.

Contents

Introduction

We offer a Helm chart to simplify the deployment of Selenium Grid Docker images to Kubernetes.

Installing the chart

If you want to install the latest master version of Selenium Grid onto your cluster you can do that by using the helm charts repository located at https://www.selenium.dev/docker-selenium.

# Add docker-selenium helm repository
helm repo add docker-selenium https://www.selenium.dev/docker-selenium

# Update charts from docker-selenium repo
helm repo update

# List all versions present in the docker-selenium repo
helm search repo docker-selenium --versions

# Install basic grid latest version
helm install selenium-grid docker-selenium/selenium-grid

# Or install full grid (Router, Distributor, EventBus, SessionMap and SessionQueue components separated)
helm install selenium-grid docker-selenium/selenium-grid --set isolateComponents=true

# Or install specified version
helm install selenium-grid docker-selenium/selenium-grid --version <version>

# In both cases grid exposed by default using ingress. You may want to set hostname for the grid. Default hostname is selenium-grid.local.
helm install selenium-grid --set ingress.hostname=selenium-grid.k8s.local docker-selenium/chart/selenium-grid/.
# Verify ingress configuration via kubectl get ingress

# Notes: In case you want to set hostname is selenium-grid.local. You need to add the IP and hostname to the local host file in `/etc/hosts`
sudo -- sh -c -e "echo \"$(hostname -i) selenium-grid.local\" >> /etc/hosts"

Installing the Nightly chart

Nightly chart is built from the latest main branch of this repository with using Nightly images. It is not recommended to use this chart in production. It is only for testing purpose. The procedure to install the Nightly chart is the same as the above, only different on the version, it is 1.0.0-nightly

# List all versions Nightly in the docker-selenium repo
helm search repo docker-selenium --devel

# Install basic grid Nightly version
helm install selenium-grid docker-selenium/selenium-grid --version 1.0.0-nightly

Chart Release Name convention

By default, all objects created by the chart will be prefixed with the release name. This is to avoid conflicts with other installations of the chart in the same namespace.

  • If you want to disable this behavior, you can deploy the chart with the release name is selenium.

  • You can override the component name via .nameOverride in a respective component. For example

    hub:
  nameOverride: my-hub-name
chromeNode:
  nameOverride: my-chrome-name

Enable Selenium Grid Autoscaling

Selenium Grid has the ability to autoscaling browser nodes up/down based on the pending requests in the session queue.

To do this KEDA is used. When enabling autoscaling using autoscaling.enabling KEDA is installed automatically. To instead use an existing installation of KEDA you can enable autoscaling with autoscaling.enableWithExistingKEDA instead.

KEDA can scale either with deployments or jobs and the charts support both types. This chart support both modes. It is controlled with autoscaling.scalingType that can be set to either job (default) or deployment.

Preview new changes in Selenium Grid Scaler implementation

Refer to README

Settings common for both job and deployment scalingType

There are few settings that are common for both scaling types. These are grouped under autoscaling.scaledOptions.

In case individual node should be scaled differently, you can override the upstream settings with .scaledOptions for each node type. For example:

autoscaling:
  scaledOptions:
    minReplicaCount: 0
    maxReplicaCount: 8
    pollingInterval: 20

chromeNode:
  scaledOptions:
    minReplicaCount: 1
    maxReplicaCount: 16
    pollingInterval: 10

Settings when scalingType with deployment

By default, autoscaling.terminationGracePeriodSeconds is set to 3600 seconds. This is used when scalingType is set to deployment. You can adjust this value, it will affect to all nodes.

In case individual node which needs to set different period, you can override the upstream settings with .terminationGracePeriodSeconds for each node type. Note that override value must be greater than upstream setting to take effect. For example:

autoscaling:
  terminationGracePeriodSeconds: 3600 #default
chromeNode:
  terminationGracePeriodSeconds: 7200 #override
firefoxNode:
  terminationGracePeriodSeconds: 1800 #not override

When scaling using deployments the HPA choose pods to terminate randomly. If the chosen pod is currently executing a test rather than being idle, then there is terminationGracePeriodSeconds seconds before the test is expected to complete. If your test is still executing after terminationGracePeriodSeconds seconds, it would result in failure as the pod will be killed.

During terminationGracePeriodSeconds period, there is preStop hook to execute command to wait for the pod can be shut down gracefully which can be defined in .deregisterLifecycle

  • There is a _helpers template with name seleniumGrid.node.deregisterLifecycle render value for pod lifecycle.preStop. By default, hook to execute the script to drain node and wait for current session to complete if any. The script is stored in node ConfigMap, more details can be seen in config nodeConfigMap.
  • You can define your custom preStop hook which is applied for all nodes via autoscaling.deregisterLifecycle
  • In case individual node which needs different hook, you can override the upstream settings with .deregisterLifecycle for each node type. If you want to disable upstream hook in a node, pass the value as false
  • If an individual node has settings .lifecycle itself, it would take the highest precedence to override the above use cases.
autoscaling:
  deregisterLifecycle:
    preStop:
      exec:
        command: ["bash", "-c", "echo 'Your custom preStop hook applied for all nodes'"]
chromeNode:
  deregisterLifecycle: false #disable upstream hook in chrome node
firefoxNode:
  deregisterLifecycle:
    preStop:
      exec:
        command: ["bash", "-c", "echo 'Your custom preStop hook specific for firefox node'"]
edgeNode:
  lifecycle:
    preStop:
      exec:
        command: ["bash", "-c", "echo 'preStop hook is defined in edge node lifecycle itself'"]

For other settings that KEDA ScaledObject spec supports, you can set them via autoscaling.scaledObjectOptions. For example:

autoscaling:
  scaledObjectOptions:
    cooldownPeriod: 60

Settings when scalingType with job

Settings that KEDA ScaledJob spec supports can be set via autoscaling.scaledJobOptions.

Settings fixed-sized thread pool for the Distributor to create new sessions

When enabling autoscaling, the Distributor might be under a high workload with parallelism tests, which are many requests incoming and nodes scaling up simultaneously. (Refer to: SeleniumHQ/selenium#13723).

By default, the Distributor uses a fixed-sized thread pool with default value is no. of available processors * 3.

In autoscaling, by default, it will calculate based on no. of node types * maxReplicaCount. For example: autoscaling.scaledOptions.maxReplicaCount=50, 3 node types (Chrome, Firefox, Edge enabled), the value is 50 * 3 + 1 = 151 is set to environment variable SE_NEW_SESSION_THREAD_POOL_SIZE to adjust the Distributor config --newsession-threadpool-size

You can override the default calculation by another value via components.distributor.newSessionThreadPoolSize (in full distributed mode) or hub.newSessionThreadPoolSize (in basic mode).

Updating Selenium-Grid release

Once you have a new chart version, you can update your selenium-grid running:

helm upgrade selenium-grid docker-selenium/selenium-grid

If needed, you can add sidecars for your browser nodes by running:

helm upgrade selenium-grid docker-selenium/selenium-grid --set 'firefoxNode.enabled=true' --set-json 'firefoxNode.sidecars=[{"name":"my-sidecar","image":"my-sidecar:latest","imagePullPolicy":"IfNotPresent","ports":[{"containerPort":8080, "protocol":"TCP"}],"resources":{"limits":{"memory": "128Mi"},"requests":{"cpu": "100m"}}}]'

Note: the parameter used for --set-json is just an example, please refer to Container Spec for an overview of usable parameters.

Uninstalling Selenium Grid release

To uninstall:

helm uninstall selenium-grid

Ingress Configuration

By default, ingress is enabled without annotations set. If NGINX ingress controller is used, you need to set few annotations to override the default timeout values to avoid 504 errors (see #1808). Since in Selenium Grid the default of SE_NODE_SESSION_TIMEOUT and SE_SESSION_REQUEST_TIMEOUT is 300 seconds.

To make the user experience better, there are few annotations will be set by default if NGINX ingress controller is used. Mostly relates to timeouts and buffer sizes.

If you are not using NGINX ingress controller, you can disable these default annotations by setting ingress.nginx to nil (aka null) via Helm CLI --set ingress.nginx=!) or via an override-values.yaml as below:

ingress:
  nginx: !

Similarly, if you want to disable a sub-config of ingress.nginx. For example: --set ingress.nginx.proxyBuffer=null)

You are also able to combine using both default annotations and your own annotations in ingress.annotations. Duplicated keys will be merged strategy overwrite with your own annotations in ingress.annotations take precedence.

ingress:
  nginx:
    proxyTimeout: 3600
  annotations:
    nginx.ingress.kubernetes.io/proxy-connect-timeout: "7200" # This key will take 7200 instead of 3600

List mapping of chart values and default annotation(s)

# `ingress.nginx.proxyTimeout` pass value to annotation(s)
nginx.ingress.kubernetes.io/proxy-connect-timeout
nginx.ingress.kubernetes.io/proxy-send-timeout
nginx.ingress.kubernetes.io/proxy-read-timeout
nginx.ingress.kubernetes.io/proxy-stream-timeout
nginx.ingress.kubernetes.io/upstream-keepalive-timeout
nginx.ingress.kubernetes.io/ssl-session-timeout

# `ingress.nginx.proxyBuffer` pass value to to annotation(s)
nginx.ingress.kubernetes.io/proxy-request-buffering: "on"
nginx.ingress.kubernetes.io/proxy-buffering: "on"

# `ingress.nginx.proxyBuffer.size` pass value to to annotation(s)
nginx.ingress.kubernetes.io/proxy-buffer-size
nginx.ingress.kubernetes.io/client-body-buffer-size

# `ingress.nginx.proxyBuffer.number` pass value to annotation(s)
nginx.ingress.kubernetes.io/proxy-buffers-number

# `ingress.nginx.websocket` pass boolean value to add backend service has WebSocket request (Hub/Router - noVNC, CDP, etc.)
nginx.org/websocket-services: "{{ template ($.Values.isolateComponents | ternary "seleniumGrid.router.fullname" "seleniumGrid.hub.fullname") $ }}"

# `ingress.nginx.sslPassthrough` pass boolean value to enable SSL Passthrough (when secure connection is enabled in Grid server backend)
nginx.ingress.kubernetes.io/ssl-passthrough: "true"
nginx.ingress.kubernetes.io/backend-protocol: "HTTPS"

# `ingress.nginx.sslSecret` to specify a Secret with the certificate `tls.crt`, key `tls.key`, the name in the form "namespace/secretName"
# By default, it is empty, the chart will use internal TLS secret resource (or the first `secretName` under `ingress.tls` if set)
nginx.ingress.kubernetes.io/proxy-ssl-secret: {{ template "seleniumGrid.tls.fullname" $ }}

# `ingress.nginx.useHttp2` pass boolean value to enable/disable HTTP/2 in TLS termination in the ingress controller
nginx.ingress.kubernetes.io/use-http2: "true"

# `ingress.nginx.upstreamKeepalive` pass value to upstream keepalive
nginx.ingress.kubernetes.io/upstream-keepalive-connections: "10000"
nginx.ingress.kubernetes.io/upstream-keepalive-time: "1h"
nginx.ingress.kubernetes.io/upstream-keepalive-request: "10000"

Refer to NGINX Ingress Controller Annotations for more details.

Refer to below section [Configuration of Secure Communication] for more details on how to configure secure communication to Ingress proxy.

Configuration

Configuration global

Check out list configuration with config key start with global. for more details.

Configuration global.K8S_PUBLIC_IP

This is the public IP of the host running Kubernetes cluster. Mainly, it is used to construct the URL for the Selenium Grid (Hub or Router) can be accessed from the outside of the cluster for Node register, Grid UI, RemoteWebDriver, etc.

  • Ingress is enabled without setting ingress.hostname. All the services will be exposed via the public IP is set in K8S_PUBLIC_IP.
  • Using NodePort to expose the services. All the services will be exposed via the public IP is set in K8S_PUBLIC_IP.
  • Using LoadBalancer to expose the services. All the services will be exposed via the LB External IP is set in K8S_PUBLIC_IP.

For example:

global:
  K8S_PUBLIC_IP: "10.10.10.10"
ingress:
    enabled: true
    hostname: ""
hub:
    subPath: "/selenium"
    serviceType: NodePort
# Source: selenium-grid/templates/node-configmap.yaml

SE_NODE_GRID_URL: 'http://10.10.10.10/selenium'

For security reasons, it is not recommend to put the credentials in the URL in env variable SE_NODE_GRID_URL. For any utilities that need to access the Grid, basic auth should get from env variables SE_ROUTER_USERNAME and SE_ROUTER_PASSWORD.

If you want to keep basic auth credential is embedded in few URLs (in case Websocket URLs construct in session capabilities), you can set basicAuth.embeddedUrl to true. By default, it is false.

Besides that, from the outside of the cluster, you can access via NodePort http://10.10.10.10:30444/selenium

Configuration of Nodes

Container ports and Service ports

By default, Node will use port 5555 to listen on container (following this) and expose via Service. You can update this value via .port in respective node type. This will be used to set SE_NODE_PORT environment variable to pass to option --port when starting the node and update in Service accordingly.

By default, if httpGet probes are enabled, it will use .port value in respective node type unless you override it via e.g. .startupProbe.port .readinessProbe.port or .livenessProbe.port in respective node type.

In a node container, there are other running services can be exposed. For example: VNC, NoVNC, SSH, etc. You can easily expose them on container via .ports and on Service service.ports in respective node type.

chromeNode:
  port: 6666 # Update `SE_NODE_PORT` to 6666
  nodePort: 30666 # Specify a NodePort to expose `SE_NODE_PORT` to outside traffic
  ports:
    - 5900 # You can give port number alone, default protocol is TCP
    - 7900
  service:
    type: NodePort # Expose entire ports on Service via NodePort
    ports:
      - name: vnc-port
        protocol: TCP
        port: 5900
        targetPort: 5900
        nodePort: 30590 # Specify a NodePort to expose VNC port
      - name: novnc-port
        protocol: TCP
        port: 7900
        targetPort: 7900
        # NodePort will be assigned randomly if not set
edgeNode:
  ports: # You also can give objects following manifest of container ports
    - containerPort: 5900
      name: vnc
      protocol: TCP
    - containerPort: 7900
      name: novnc
      protocol: TCP

Configuration of shm size limit for browser nodes

By default, node browsers (Chrome/Chromium, Edge) leave the config key dshmVolumeSizeLimit as empty. It means the /dev/shm volume mount is disabled, and argument --disable-dev-shm-usage is passed to the browser via container environment variable (get motivation from this post). You can set another valid value to enable it back. For example:

chromeNode:
    dshmVolumeSizeLimit: "2Gi"
edgeNode:
    dshmVolumeSizeLimit: "2Gi"

For Firefox node, the default value is kept as 2Gi. You can override it via firefoxNode.dshmVolumeSizeLimit.

Configuration of Probes

Node Probes

By default, startupProbe is enabled and readinessProbe and livenessProbe are disabled. You can enable/disable them via .startupProbe.enabled .readinessProbe.enabled .livenessProbe.enabled in respective node type.

By default, probes are using httpGet method to check the node state. It will use .port value in respective node type unless you override it via e.g. .startupProbe.port .readinessProbe.port or .livenessProbe.port in respective node type.

Other settings of probe support to override under .startupProbe .readinessProbe .livenessProbe in respective node type.

    schema
    path
    port
    initialDelaySeconds
    failureThreshold
    timeoutSeconds
    periodSeconds
    successThreshold

You can configure the probes (as Kubernetes supports) to override the default settings. For example:

edgeNode:
  port: 5555
  startupProbe:
    enabled: true
    tcpSocket:
      port: 5555
    failureThreshold: 10
    periodSeconds: 5

Distributor Probes

By default, startupProbe, readinessProbe and livenessProbe are enabled for this component in both full distributed and Hub-Nodes mode.

There is a script in chart configs/distributor/distributorProbe.sh is loaded into ConfigMap and mounted to the container is used by livenessProbe. You can customize the script via --set-file distributorConfigMap.extraScripts.distributorProbe\.sh=/path/to/your_script.sh or set via YAML values.

There are some reports on a scenario that would be difficult to reproduce or rare: Grid UI is accessible but no nodes can be fetched or registered. Or something like there are few requests in session queue but could not be accepted. After restarting the Distributor, the issue is resolved. Based on that, a proactive approach to do automatic restart whenever detecting it is not healthy via livenessProbe and the condition check is executed. The script queries GraphQL endpoint to get sessionCount, and sessionQueueSize. If the sessionQueueSize is greater than 0 and sessionCount is 0 until the failureThreshold, the Distributor will be restarted. You can adjust the threshold as well as interval via probe settings.

Router Probes

By default, startupProbe, readinessProbe and livenessProbe are enabled for this component in full distributed mode.

There is a script in chart configs/router/routerProbe.sh loaded into ConfigMap and mounted to the container is used by livenessProbe. You can customize the script via --set-file routerConfigMap.extraScripts.routerProbe\.sh=/path/to/your_script.sh or set via YAML values.

The script checks GraphQL endpoint is reachable. If the http_code is not 200 until the failureThreshold, the Router will be restarted. You can adjust the threshold as well as interval via probe settings.

Configuration extra scripts mount to container

This is supported for containers of browser node, video recorder and video uploader. By default, in these containers, there are scripts, config files implemented. In case you want to customize or replace them with your own implementation. Instead of forking the chart, use volume mount. Now, from your external files, you can insert them into ConfigMap via Helm CLI --set-file or compose them in your own YAML values file and pass to Helm CLI --values when deploying chart. Any files name that you defined will be picked up into ConfigMap and mounted to the container.

nodeConfigMap:
  extraScriptsDirectory: "/opt/selenium"
  extraScripts:
    nodePreStop.sh: |
      #!/bin/bash
      echo "Your custom script"

recorderConfigMap:
  extraScriptsDirectory: "/opt/bin"
  extraScripts:
    video.sh: |
        #!/bin/bash
        echo "Your custom script"    
    video_graphQLQuery.sh: |
        #!/bin/bash
        echo "My new script"

uploaderConfigMap:
  extraScriptsDirectory: "/opt/bin"
  extraScripts:
    upload.sh: |
        #!/bin/bash
        echo "Your custom entry point"
  secretFiles:
    upload.conf: |
        [myremote]
        type = s3

Via Helm CLI, you can pass your own files to particular config key. Note that, the file name contains dot . for file extension, it will impact to the key name convention in Helm CLI. In this case, be careful to escape the dot . in the file name. For example a command in Unix:

helm upgrade -i test \
    --set-file 'nodeConfigMap.extraScripts.nodePreStop\.sh=/path/to/myScript.sh' \
    --set-file 'recorderConfigMap.extraScripts.video\.sh=/path/to/myCustom.sh' \
    selenium-grid

Files in .extraScripts will be mounted to the container with the same name within directory is defined in .extraScriptsDirectory. For example, in the above config, nodePreStop.sh will be mounted to /opt/selenium/nodePreStop.sh in the node container.

Configuration of video recorder and video uploader

Video recorder

The video recorder is a sidecar deployed with the browser nodes. It is responsible for recording the video of the browser session. The video recorder is disabled by default. To enable it, you need to set the following values:

videoRecorder:
  enabled: true

At chart deployment level, that config will enable video container always. In addition, you can disable video recording process via session capability se:recordVideo. For example in Python binding:

from selenium.webdriver.chrome.options import Options as ChromeOptions
from selenium import webdriver

options = ChromeOptions()
options.set_capability('se:recordVideo', False)
driver = webdriver.Remote(options=options, command_executor="http://localhost:4444")

In recorder container will perform query GraphQL in Hub based on Node SessionId and extract the value of se:recordVideo in capabilities before deciding to start video recording process or not. You can customize by reading on section Configuration extra scripts mount to container.

Video uploader

The uploader is extra utility in the video container. It is responsible for uploading the video to a remote location. The uploader is disabled by default. To enable it, you need to set the following values:

videoRecorder:
  uploader:
    enabled: true

By default, the uploader uses RCLONE to upload the video to a remote location. RCLONE requires a configuration file to define different remote locations. Refer to RCLONE docs for more details. Config file might contain sensitive information such as access key, secret key, etc. hence it is stored in Secret.

The uploader requires destinationPrefix to be set. It is used to instruct the uploader where to upload the video. The format of destinationPrefix is remote-name://bucket-name/path. The remote-name is configured in RCLONE. The bucket-name is the name of the bucket in the remote location. The path is the path to the folder in the bucket.

By default, the config file is empty. You can override the config file via --set-file uploaderConfigMap.secretFiles.upload\.conf=/path/to/your_config.conf or set via YAML values.

For example, to configure an S3 remote hosted on AWS with named mys3 and the bucket name is mybucket, you can set the following values:

uploaderConfigMap:
  secretFiles:
    upload.conf: |
        [mys3]
        type = s3
        provider = AWS
        env_auth = true
        region = ap-southeast-1
        location_constraint = ap-southeast-1
        acl = private
        access_key_id = xxx
        secret_access_key = xxx

videoRecorder:
  uploader:
    destinationPrefix: "mys3://mybucket/subFolder"

You can prepare a config file with multiple remotes are defined. Ensure that [remoteName] is unique for each remote.

Instead of using config file, another way that RCLONE also supports to pass the information via environment variables. ENV variable with format: RCLONE_CONFIG_ + name of remote + _ + name of config file option (make it all uppercase). In this case the remote name it can only contain letters, digits, or the _ (underscore) character. All those ENV variables can be set via videoRecorder.uploader.secrets, it will be stored in Secret.

For example, the same above config can be set via ENV vars as below:

videoRecorder:
  uploader:
    destinationPrefix: "mys3://mybucket"
    secrets:
      RCLONE_CONFIG_MYS3_TYPE: "s3"
      RCLONE_CONFIG_MYS3_PROVIDER: "GCS"
      RCLONE_CONFIG_MYS3_ENV_AUTH: "true"
      RCLONE_CONFIG_MYS3_REGION: "asia-southeast1"
      RCLONE_CONFIG_MYS3_LOCATION_CONSTRAINT: "asia-southeast1"
      RCLONE_CONFIG_MYS3_ACL: "private"
      RCLONE_CONFIG_MYS3_ACCESS_KEY_ID: "xxx"
      RCLONE_CONFIG_MYS3_SECRET_ACCESS_KEY: "xxx"
      RCLONE_CONFIG_MYS3_ENDPOINT: "https://storage.googleapis.com"
      RCLONE_CONFIG_MYS3_NO_CHECK_BUCKET: "true"

Those two ways are equivalent. You can choose one of them or combine them. When both config file and ENV vars are set, value in upload.conf will take precedence.

Besides the configuration, the script for entry point of uploader container also needed. You can override the script via --set-file uploaderConfigMap.extraScripts.upload\.sh=/path/to/your_script.sh or set via YAML values. For example:

uploaderConfigMap:
  extraScripts:
    upload.sh: |
        #!/bin/bash
        echo "Your custom entry point"

In case you want to configure another sidecar container for uploader, you can set a name for videoRecorder.uploader.name and create a config key with the same name under videoRecorder with all the settings for your container. Set name of videoRecorder.uploader.entryPointFileName if your container start by a different entry point. For example:

uploaderConfigMap:
    extraScripts:
        upload.sh: |
            #!/bin/bash
            echo "Script control the uploader process"

videoRecorder:
    enabled: true
    uploader:
        enabled: true
        name: "s3"
        entryPointFileName: "upload.sh"
        destinationPrefix: "s3://mybucket"
        secrets:
            AWS_REGION: "ap-southeast-1"
            AWS_ACCESS_KEY_ID: "xxxx"
            AWS_SECRET_ACCESS_KEY: "xxxx"
    s3:
        imageRegistry: public.ecr.aws
        imageName: bitnami/aws-cli
        imageTag: latest

Configuration of Secure Communication

Selenium Grid supports secure communication between components. Refer to the instructions and options are able to configure the secure communication. Below is the details on how to enable secure communication in Selenium Grid chart.

In the chart, there is directory certs contains utility scripts, the default self-signed certificate, private key (as PKCS8 format), and Java Keystore (JKS) to teach Java about secure connection (since we are using a non-standard CA) for your trial, local testing purpose.

You can generate your own self-signed certificate put them in that default directory by using script certs/gen-cert-helper.sh with adjust needed information before deploying chart. The certificate, private key, truststore are mounted to the components via Secret.

Usage of certs/gen-cert-helper.sh script:

# Generate self-signed to target directory (by default output in same directory with script)
./certs/gen-cert-helper.sh -d /path/to/your/
# Add current host IP to the certificate
ADD_IP_ADDRESS=hostname ./certs/gen-cert-helper -d /path/to/your/
# Add multiple IP addresses to the certificate (comma-separated)
ADD_IP_ADDRESS=",IP:10.10.10.10,IP:10.10.11.11" ./certs/gen-cert-helper.sh -d /path/to/your/
# Other environment variables that script consumes
# CERTNAME, STOREPASS, KEYPASS, ALIAS, SERVER_KEYSTORE, BASE64_ONLY

Create TLS Secret

There are multiple ways to insert your certificate, private key, truststore to the components. You can choose one of following ways:

  1. Replace your certificate, private key, truststore to the default directory certs in chart with the same name before deploying the chart.

  2. Use Helm CLI to pass your certificate, private key, truststore via --set-file when deploying the chart. For example (replace $RELEASENAME and $NAMESPACE with your values):

    helm upgrade -i $RELEASENAME -n $NAMESPACE docker-selenium/selenium-grid \
    --set tls.enabled=true \
    --set-file tls.secretFiles.tls\.crt=/path/to/your/tls.crt \
    --set-file tls.secretFiles.tls\.key=/path/to/your/tls.key \
    --set-file tls.secretFiles.server\.jks=/path/to/your/server.jks \
    --set-file tls.secretFiles.server\.pass=/path/to/your/server.pass

  3. Create your own TLS Secret with your certificate, private key, truststore and pass the Secret name via tls.nameOverride when deploying the chart. For example (replace $RELEASENAME and $NAMESPACE with your values):

    # Steps to prepare your self-signed certificate
./certs/gen-cert-helper.sh -d /path/to/your/
# Create TLS Secret with your certificate, private key, truststore (or a Secret type kubernetes.io/tls)
kubectl create secret generic -n $NAMESPACE my-external-tls-secret \
    --from-file=tls.crt=/path/to/your/tls.crt \
    --from-file=tls.key=/path/to/your/tls.key \
    --from-file=server.jks=/path/to/your/server.jks \
    --from-file=server.pass=/path/to/your/server.pass
# Deploy chart with your external TLS Secret
helm upgrade -i $RELEASENAME -n $NAMESPACE docker-selenium/selenium-grid \
    --set tls.enabled=true --set tls.nameOverride=my-external-tls-secret

    In case your external secret contains key file names are different with default, you can instruct server to use them via following values:

    tls:
  enabled: true
  nameOverride: my-external-tls-secret
  certificateFile: "my-tls.crt"
  privateKeyFile: "my-tls.key"
  trustStoreFile: "my-server.jks"
  trustStorePassword: "mytruststorepassword"

Secure Connection to Selenium Grid components

When enabling secure communication between Selenium Grid server components, you need to set the following values:

tls:
  enabled: true

In additional, if the ingress is enabled, and approach SSL Passthrough is used to ensure the request forwards to the backend components via an encrypted connection. With ingress.hostname is set, the default server TLS secret is also used for hosts TLS secretName when ingress.tls is empty. Once you specify ingress.tls, your specified secret will be used for hosts TLS secretName. For example

SeleniumGrid_TLS_SSL-Passthrough

tls:
  enabled: true

ingress-ngnix:
  enabled: true

Below is an example of Grid UI accessible via NodePort with secure connection, and using external TLS Secret (replace $RELEASENAME and $NAMESPACE with your values):

helm upgrade -i $RELEASENAME -n $NAMESPACE docker-selenium/selenium-grid \
  --set ingress.enabled=false \
  --set isolateComponents=true \
  --set components.router.serviceType=NodePort \
  --set tls.enabled=true \
  --set tls.nameOverride=my-external-tls-secret

Grid UI can be accessed via HTTPS address https://your.host.public.ip:30444.

SeleniumGrid_TLS_WithoutProxy

Secure Connection to the Ingress proxy

When enabling secure communication via HTTPS/TLS between the client and the Ingress proxy only (SSL Offloading / aka SSL Termination). The proxy will terminate the TLS connection, decrypt incoming HTTPS traffic and send it to the backend components without encryption. The backend Selenium Grid components doesn't need to understand HTTPS. To enable this mode, you need to set the following values:

tls:
  ingress:
    enabled: true

SeleniumGrid_TLS_SSL-Termination

In additional, a self-signed certificate and private key can be generated runtime during the chart deployment for Ingress TLS by setting these values:

tls:
  ingress:
    generateTLS: true
    defaultName: "MySelfSignedCert"
    defaultDays: 3650
    defaultCN: "www.domain.com" # Common Name
    defaultSANList:
      - selenium-grid.prod.domain.com # Subject Alternative Name
      - selenium-grid.staging.domain.com
    defaultIPList:
      - 10.87.99.100 # Public IP of the host running K8s or LoadBalancer IP
      - 10.87.100.101

ingress-ngnix:
  enabled: true

You can get the tls.crt and tls.key from the Secret after the chart is deployed. For example (replace $RELEASENAME and $NAMESPACE with your values):

kubectl get secret $RELEASENAME-selenium-tls-secret -n $NAMESPACE -o jsonpath="{.data.tls\.crt}" | base64 -d > ./tls.crt
kubectl get secret $RELEASENAME-selenium-tls-secret -n $NAMESPACE -o jsonpath="{.data.tls\.key}" | base64 -d > ./tls.key

Below is an example of Grid UI accessible via secure connection to the Ingress proxy with self-signed certificate in external TLS Secret (replace $RELEASENAME and $NAMESPACE with your values):

helm upgrade -i $RELEASENAME -n $NAMESPACE docker-selenium/selenium-grid \
  --set ingress.enabled=true \
  --set ingress.hostname="selenium-grid.prod.domain.com" \
  --set tls.ingress.enabled=true \
  --set tls.nameOverride=my-external-tls-secret

Grid UI can be accessed via HTTPS address https://selenium-grid.prod.domain.com.

Inline config TLS for the Ingress resource is also considered as enable secure connection to the Ingress proxy. For example, below is the config with using external TLS Secret for the Ingress resource and enable sub-chart NGINX Ingress Controller:

ingress:
  enableWithController: true
  hostname: selenium-grid.prod.domain.com
  tls:
    - secretName: my-external-tls-secret
      hosts:
        - selenium-grid.prod.domain.com

In case the Ingress resource is configured without hostname and tls, the incoming traffic access via global.K8S_PUBLIC_IP. When sub-chart ingress-nginx is enabled (deploy Ingress NGINX Controller together), the default TLS secret can also be assigned via ingress-nginx.controller.extraArgs.default-ssl-certificate. For example (replace $RELEASENAME and $NAMESPACE with your values):

helm upgrade -i $RELEASENAME -n $NAMESPACE docker-selenium/selenium-grid \
  --set global.K8S_PUBLIC_IP=$(hostname -i) \
  --set tls.ingress.enableWithController=true \
  --set tls.nameOverride=my-external-tls-secret \
  --set ingress-nginx.controller.extraArgs.default-ssl-certificate=$NAMESPACE/my-external-tls-secret

TLS termination in the ingress controller, HTTP/2, and related troubleshooting

In case the Selenium Grid is deployed with the Ingress controller in front, and the Ingress controller has configured the secure connection with approach SSL termination to terminate the TLS connection, the backend components (mostly Hub/Router to process the request and return to the client) will receive the incoming in plain HTTP. In a few confirmations (also referred to ChatGPT)

When TLS termination is performed by an ingress controller, HTTP/2 is typically enabled by default. This is because many ingress controllers are designed to support modern web protocols to ensure better performance and efficiency. For example, popular ingress controllers like NGINX and HAProxy enable HTTP/2 by default when handling HTTPS traffic.

At that time, the Selenium Grid server returns the response in HTTP/1.1. However, this mismatch is not expected to cause any problems. Selenium Grid is using JDKHttpClient to communicate between components since the following OpenJDK docs mentioned that

The Java HTTP Client supports both HTTP/1.1 and HTTP/2. By default, the client will send requests using HTTP/2. Requests sent to servers that do not yet support HTTP/2 will automatically be downgraded to HTTP/1.1

A few reports mention the error java.io.IOException: HTTP/1.1 header parser received no bytes, java.io.IOException: /: GOAWAY received, or a timed-out issue with a stack trace containing jdk.internal.net.http.Http2Connection, or Http2ClientImpl when creating a RemoteWebDriver session.

What could be the issue around this? It could be due to different JDK versions used. Since JDK20, the default keepalive timeout has been adjusted; see docs on jdk.httpclient.keepalive.timeout (default to 30). Or it could be jdk.httpclient.maxstreams (default to 100) if Grid serves many client requests at the same time, it could reach the maximum stream limit.

In some scenarios, the issue might be resolved by setting ClientConfig with HTTP/1.1 when creating RemoteWebDriver. For example, in Java binding you can try this:

ClientConfig config = ClientConfig.defaultConfig().baseUrl(seleniumGridUrl)
                      .readTimeout(300)
                      .version(HttpClient.Version.HTTP_1_1.name());

driver = RemoteWebDriver.builder().oneOf(new ChromeOptions())
         .config(config).build();

With the workaround set http version via ClientConfig also there was a point mentioned that we can understand something like HTTP/1.1 header parser received no bytes, or GOAWAY is an IOException thrown by client HTTP/2, and when switching client to HTTP/1.1, it could go to a situation that would continue to get "random" IOExceptions with a different message from the server.

For example, in this case the issue could be due to HTTP/2 configs on Ingress controller. Refer to usage of Annotations ConfigMap settings in NGINX Ingress Controller.

  • use-http2 (default is true) - enable or disable HTTP/2 support in secure connection.
  • upstream-keepalive-timeout (default to 60) - timeout during which an idle keepalive connection to an upstream server will stay open.
  • upstream-keepalive-connections (default to 320) - maximum number of idle keepalive connections to upstream servers. When this number is exceeded, the least recently used connections are closed

The above notes are motivated by SeleniumHQ/selenium#14258. Kindly let us know if you have further troubleshooting on this.

Node Registration

To enable secure in the node registration to make sure that the node is one you control and not a rouge node, you can enable and provide a registration secret string to Distributor, Router and Node servers in config registrationSecret. For example:

registrationSecret:
  enabled: true
  value: "matchThisSecret"

Configuration of tracing observability

The chart supports tracing observability via Jaeger. To enable it, you need to set the following values:

tracing:
  enabled: true

With this configuration, by default, Jaeger (all-in-one) will be deployed in the same namespace as Selenium Grid. The Jaeger UI can be accessed via same ingress with prefix /jaeger, for example: http://your.host.name/jaeger. The traces will be collected from all the components of Selenium Grid and can be viewed in the Jaeger UI.

In case you want to use your own existing Jaeger instance, you can set the following values:

tracing:
    enabledWithExistingEndpoint: true
    exporter: otlp
    exporterEndpoint: 'http://jaeger.domain.com:4317'

By default, the exporter is set to otlp. It is wide compatibility with many tracing backends. Read more: vendors native support OpenTelemetry and guidelines on integration

Configuration of Selenium Grid chart

Check out list configuration parameter of chart and their default values for more details.

Configuration of KEDA

If you are setting autoscaling.enabled to true, chart KEDA is installed and can be configured with values with the prefix keda. So you can for example set keda.prometheus.metricServer.enabled to true to enable the metrics server for KEDA. See https://github.com/kedacore/charts/blob/main/keda/README.md for more details.

Configuration of Ingress NGINX Controller

If you are setting ingress-nginx.enabled to true, chart Ingress NGINX Controller is installed and can be configured with values with the prefix ingress-nginx. See https://github.com/kubernetes/ingress-nginx for more details.

Configuration of Jaeger

If you are setting tracing.enabled to true, chart Jaeger is installed and can be configured with values with the prefix jaeger. See https://github.com/jaegertracing/helm-charts for more details.

Configuration for Selenium-Hub

You can configure the Selenium Hub with config key starts with hub..

Check out list configuration parameter of chart and their default values for more details.

Configuration for isolated components

If you implement selenium-grid with separate components (isolateComponents: true), you can configure all components via config key starts with components.

Check out list configuration parameter of chart and their default values for more details.

See how to customize a helm chart installation in the Helm Docs for more information.